一种圆柱度测量基准的误差分离方法  

Error Separated Method of Measuring Datum for Cylindricity Measurement

作　　者：雷贤卿[1] 李济顺[2] 李言[1] 周彦伟[2] 薛玉君[2] 

机构地区：[1]西安理工大学,西安741008 [2]河南科技大学,洛阳471003

出　　处：《中国机械工程》2006年第20期2102-2106,共5页China Mechanical Engineering

基　　金：河南省高校杰出科研人才创新工程项目(2004KYCX006);河南省自然科学基金资助项目(0311052700);河南省杰出科研人才创新基金资助项目(0621000800)

摘　　要：通过对主轴回转误差运动的分析,结合三点法圆度误差分离技术,提出了一种完全分离圆柱度测量基准误差的分离方法,即利用主轴回转轴线平均线、测量传感器及直行导轨之间的空间位置关系,建立相应的坐标系,在分离出被测截面圆度误差、最小二乘圆心初始坐标的基础上,完整地分离出影响圆柱度精密测量的径向回转运动误差和导轨的直行运动误差。该技术不仅可以消除测量基准误差对圆柱度测量精度的影响,还可以实现主轴回转误差、导轨直线度以及导轨对主轴平行度误差的精密测量,对高精度误差补偿加工和机床的精度检验也具有重要意义。Through the analysis to rotation error motion of the spindle, and using three-probe method roundness measurement error separation technique, a kind of error separated method which could separate datum error of cylindricity measurement was put forward. Using spatial position relationship of the axis average line of rotor, measurement sensors and rectilinear motion, the relevant coordinate systems could be established. The radial rotation motion error and the rectilinear motion error which influence precision measurement of cylindrical form error was separated completely based on the roundness and space coordinates of the different cross sections which had been separated. This technique eliminates the influence of measuring datum on precision of cylindricity measurement, and carries out the accurate measurement of the spindle motion error, straightness error of slide-way and the parallelism error between spindle and slide-way, and can also be applied to the super precision compensation machining and accuracy test of machine tool.

关 键 词：圆柱度 测量基准 误差分离 坐标系 

分 类 号：TG806[金属学及工艺—公差测量技术] TH161[机械工程—机械制造及自动化]