原位反应法制备Al_2O_3-TiC/Al复合材料  

Fabrication of Al_2O_3-TiC/Al Composites by In-situ Reaction

作　　者：陈洪美[1] 于化顺[1] 张静[1] 闵光辉[1] 

机构地区：[1]山东大学

出　　处：《特种铸造及有色合金》2006年第10期674-675,共2页Special Casting & Nonferrous Alloys

摘　　要：通过向含Ti的Al-Si合金熔体中通入CO2气体制备Al2O3-TiC/Al复合材料的方法,研究了Al2O3-TiC/Al复合材料特性。用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)对复合材料的组织进行了研究。研究表明,CO2与合金熔体中的Al、Ti原位反应生成Al2O3和TiC颗粒,Al2O3和TiC颗粒尺寸在0.2～1.0μm之间,均匀分布在基体中,反应生成的Al2O3和TiC颗粒数量与CO2的通入时间有关。Al_2O_3-TiC/Al composites were prepared by adding CO_2 into Al-Si alloy melt containing Ti.Microstructure of the composites has been observed by X-ray diffraction(XRD),scanning electron microscope(SEM)and transmission electric microscope(TEM).It is found that Al_2O_3 and TiC particle with grain size of 0.2～1.0 μm formed from in-situ reaction of CO_2 with Al and Ti can be uniformly distributed into the matrix.In addition,formed Al_2O_3 and TiC numbers are obviously dependent on the injection time of CO_2.

关 键 词：原位反应 铝基复合材料 显微组织 

分 类 号：TB333[一般工业技术—材料科学与工程] TB331