氯氧镁凝胶/聚丙烯酸酯复合材料弯曲性能的研究  被引量:1

Study on the Flexural Properties of the Magnesium Oxychloride Gelatin/Polyacrylate Composites

在线阅读下载全文

作  者:王晓[1] 林斯娜[1] 李小澄 陈斯蔼[1] 许家瑞[1] 

机构地区:[1]中山大学化学与化学工程学院∥聚合物复合材料及功能材料教育部重点实验室,广东广州510275 [2]汕头市龙湖穗汕雕塑环艺工程有限公司,广东汕头515041

出  处:《中山大学学报(自然科学版)》2006年第5期51-54,共4页Acta Scientiarum Naturalium Universitatis Sunyatseni

基  金:国家自然科学基金资助项目(50073030);中山大学理科科研资助项目(01-058-711094);中山大学"创新化学实验研究基金"资助项目

摘  要:研究了氯氧镁凝胶/聚丙烯酸酯复合材料配方各组分对弯曲性能的影响。实验结果表明,复合材料的弯曲性能在砂料质量分数为40%时达到最大,砂料质量分数过高则反而下降。粒径小的砂料具有更好的增强效果。砂料质量分数为40%时,20目级的MOC/PAR复合材料的弯曲强度的增加量达到44.3%,弯曲模量的增加量达到79.8%;40目级的MOC/PAR复合材料的弯曲强度的增加量达到75.4%,其弯曲模量的增加量达到109.7%。The influences of the variations of the ingredients of the Magnesium oxychloride gelatin/ polyacrylate composites on their flexural properties was studied. Optimum compounds were obtained with 40% of the sand fraction of the composites. Moreover, low flexural properties were given when sand was overfed. Small size of the grains of sand brought about the materials good reinforcement with the raise of the flexural properties. Composite with 40% of mass fraction of sand of which the grain diameter ranged from 0. 35~0. 84 mm resulted in 44. 3% and 79. 8% of the increment of the flexural strength and the flexural modulus, respectively, compared with the blank test. Additionally, composite with the same amount of mass fraction of sand of which the grain diameter ranged from 0. 12 ~ 0. 35 mm exhibited 75.4% and 10. 97% of the increment of the flexural strength and the flexural modulus.

关 键 词:氯氧镁凝胶 复合材料 弯曲性能 聚丙烯酸酯 环境艺术 环保装饰 

分 类 号:TB332[一般工业技术—材料科学与工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象