细号高密织物上浆压力分析  

Analyses of Sizing Pressure of Fine Count High Density Fabric

作　　者：樊飞 王武生 李敏 

机构地区：[1]陕西风轮纺织股份公司

出　　处：《棉纺织技术》2006年第11期54-55,共2页Cotton Textile Technology

摘　　要：为提高细号高密织物的浆纱质量,采用25 kN左右、20 kN左右、15 kN左右三种压浆力分别对四种细号及特细号高密品种进行了上浆实践。通过对比分析三种压浆力条件下的浆纱增强率及减伸率,认为细号及特细号品种的浆纱工艺应根据实际情况采用15 kN左右的压浆力,以保证经纱获得足够的被覆,细号品种应适当增大压力(25 kN)以有效提高浆纱渗透效果。To enhance sizing quality of fine count high density fabric, sizing practice of four fabrics of fine count high density and superfine count high density was done by using sizing pressure of 25 kN, 20 kN and 15 kN. Reinforcing rate and reducing elongation of sizing were analyzed through comparing the condition of three sizing pressure. The result shows that superfine variety should adopt 15 kN sizing pressure according to practice to guarantee enough coverage. Fine count variety should increase pressure （25 kN） to enhance sizing imbue effect.

关 键 词：浆纱工艺 压浆力 渗透 被覆 毛羽 

分 类 号：TS105.213[轻工技术与工程—纺织工程]