一种低通带波纹的EBG带阻滤波器  

An EBG Band-stop Filter with Low Ripples in Pass-bands

作　　者：高初[1] 陈志宁 王蕴仪[1] 杨宁 QING Xian-ming 

机构地区：[1]南京东南大学毫米波国家重点实验室,南京210096 [2]新加坡通信研究院 [3]新加坡Motorola电子有限公司工业园3,新加坡569088

出　　处：《微波学报》2006年第5期63-66,共4页Journal of Microwaves

基　　金：国家自然科学基金资助项目(60471018)

摘　　要：分析了串联加载的电磁带隙结构(EBG)带阻滤波器的通带波纹,比较了电容、电感和并联谐振加载的影响,设计和制作了一种低通带波纹的EBG带阻滤波器。该结构共有4个周期,通过在微带线的接地面上蚀刻螺旋形结构来实现。滤波器的中心频率为2.44GHz,阻带中心衰减大于50dB,相邻通带内的波纹小于0.29dB。仿真结果与试验结果相吻合,说明了分析和设计的正确性。This paper analyzes ripples in pass-bands of series loaded Electromagnetic Bandgap （EBG） band-stop filters. The effects of capacitor, inductor and parallel resonance on ripple are compared. An EBG band-stop filter with low rippies in pass-bands has been designed and fabricated as well. The filter has 4 periods. And it is realized by etching spiral slots on the ground of a microstrip. The filter has a center frequency of 2.44GHz. Its attenuation at stop-band center is more than 50dB, while ripples in adjacent pass-bands are less than 0.29dB. The coincident results of simulation and measurement validate the analysis and design.

关 键 词：带阻滤波器 等效电路 电磁带隙 波纹 

分 类 号：TN713.5[电子电信—电路与系统]