检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:谢建军[1]
机构地区:[1]中南林业科技大学材料科学与工程学院
出 处:《中南林学院学报》2006年第5期55-59,共5页Journal of Central South Forestry University
基 金:湖南省科技攻关计划项目(05NK3052);中南林业科技大学科研启动基金资助项目.
摘 要:以丙烯酰胺(AM)和马来酸酐(MAH)为单体M,N,N’-亚甲基双丙烯酰胺为交联剂C,过硫酸钾为引发剂I,在一定中和度下采用溶液聚合法,合成了丙烯酰胺/马来酸酐共聚高吸水树脂PAMMAH,并进行了吸液性能研究,得到最优合成条件为:R(n (AM):n(MAH))=5:1,WM=25%,WC=0.02%,WI=0.4%,N=130%,30℃(4 h)→60℃(4 h)→80℃(3 h).最大吸液性能为:吸蒸馏水倍率Qw=3 193 g/s,吸0.9%NaCl盐水倍率Qs=213 g/g.PAMMAH树脂的吸蒸馏水倍率、吸0.9%NaCl盐水倍率与吸液时间的关系为:Qw=1 174.15 t0.2511和Qs=68.86 t0.2127.A super-absorbent copolymer PAMMAH was prepared in water solution by using acrylamide (AM) and maleic anhydride (MAH) as monomers, potassium persulfate as initiator, and N, N P-methylene bis-acrylmide (NMBA)as cross linker, and the absorbency of PAMMAH in distilled water and 0. 9%(mass fraction) NaCl aqueous solution was investigated. The best synthetic conditions were n(AM) s n(MAH)) =5 : 1, the monomer concentration Wu=25%, the cross-linker concentration Wc=0. 02%, the initiator concentration Wt=0. 4%, neutral degree N=130%, reaction temperature and time 30℃ (4 hours)→60℃ (4 hours)→80℃ (3 hours). The results indicate that the absorbency of PAMMAH is up to Qw=3 193 g/g and Qs=213 g/g in distilled water and in 0.9% NaCl solution respectively. The relation between the absorbency' and the absorbent time for PAMMAH was Qw=1 174.15 to. 251 t in distilled water, and Qs= 68.86 t^0.2127 in 0.9% NaCl aqueous solution.
关 键 词:功能高分子材料 高吸水树脂 丙烯酰胺 马来酸酐 吸液性能 溶液聚合
分 类 号:TQ325.7[化学工程—合成树脂塑料工业] TB34[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.225