检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张金波[1] 王宏华[2] 李开霞[1] 胡钢[1]
机构地区:[1]河海大学计算机及信息工程学院,常州213022 [2]河海大学电气工程学院,南京210098
出 处:《仪器仪表学报》2006年第11期1505-1508,共4页Chinese Journal of Scientific Instrument
基 金:常州市科技攻关项目(CE20040431);中华人民共和国专利项目(专利号ZL200520110018.3);河海大学常州校区科技创新基金(04B002-02);常州市青年科技人才培养项目(CQ2006004)资助项目。
摘 要:本文提出一种高压电力线路相位无线检测的新方法,该方法由2个发送装置和1个接收装置组成,发送装置主要利用电磁耦合和限幅电路采集电网电压信号,将采集到的电网电压信号进行ASK调制发送到接收装置,接收装置将接收到的来自2个发送装置的电压信号进行解调,解调后恢复原来相位信号进行实时比较得到相位脉冲信号,从而间接地实现了对被测线路不同相之间的相位进行检测,发送模块采用高频发送来解决强磁场干扰问题,利用该技术已成功地开发了高压电力线路无线核相仪,该装置可以方便地对电网并网合闸进行检测。A new method of wireless phase measurement for high voltage electric power line is introduced.The method includes transmitting and receiving devices. The voltage signal of the power line is acquired using the electromagnetic coupling and clipping circuits in the transmitting device. Then, the acquired voltage signals are ASK modulated and sent to the receiving device. The receiving device demodulates the received signals,and the demodulated signals restore their original phase information that is compared to get the phase pulse signal. Therefore the phase measurement of the power line under test is indirectly achieved.Based on this technique,wireless phase detector for high voltage power transmission line was successfully designed and applied.
分 类 号:TM835.1[电气工程—高电压与绝缘技术] TM154.1
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.8