高固含量聚合物乳液研究新进展  

Advances in research on high-solid content polymer emulsion

作　　者：刘建平[1] 王红[2] 沈黎[1] 王晓萍[3] 

机构地区：[1]昆明理工大学材料与冶金工程学院,云南昆明650093 [2]昆明理工大学理学院,云南昆明650093 [3]昆明理工大学科技处,云南昆明650093

出　　处：《粘接》2006年第6期32-36,共5页Adhesion

基　　金：云南省自然科学基金项目(2004E0129M);云南省教育厅科学基金项目(04Z138D5Y0603D)

摘　　要：将高固含量(>6O%)聚合物乳液的制备方法按机理分为控制乳胶粒直径分布、增大乳胶粒直径和使乳胶粒发生形变3类。综述了高固含量乳液的制备工艺和方法、基础理论及应用研究近况,并对高固含量乳液制备的发展进行了展望。High-solid content is always an aim of polymer emulsion. This paper classified the approaches of preparing high-solid content latex to three kinds according to the mechanism, i. e. controlling the particle size distribution （PSD） , amplifying the particle size and deforming the particles. The advances in the research on preparing methods, theories and applications of high-solid polymer emulsion were reviewed. Some proposals for high-solid content polymer emulsion were given.

关 键 词：高固含量 乳液 研究 进展 

分 类 号：TQ436.5[化学工程]