梳棉机后固定盖板隔距对纤维长度分布的影响  

Influence on Fiber Length Distribution of Carding Machine Back Stationary Flat Gauge

作　　者：孙鹏子[1] 张志丹[1] 

机构地区：[1]辽东学院

出　　处：《棉纺织技术》2006年第12期12-15,共4页Cotton Textile Technology

基　　金：辽宁省科技攻关项目(项目号为2003220026)

摘　　要：为探讨后固定盖板隔距对纤维长度分布的影响,用AFIS单纤维测试仪对不同道夫速度、刺辊速度和后固定盖板隔距所加工生条进行了纤维长度检测。结果显示,无论产量高低,隔距过小对长纤维损伤都比较严重;当产量较低时,以0.5 mm隔距方案对生条中纤维长度分布较为有利;当产量较高时,以0.75 mm^1.0mm固定盖板隔距方案对生条中纤维长度分布比较有利。To discuss the influences on fiber length distribution of back stationary fiat gauge, fiber length tests were done to carding slivers in the condition of different doffer speed, licker-in speed and back stationary gauge by AFIS single fiber tester. The result shows that small gauge has worse influence on long fiber, when output is lower, 0.5 mm gauge is suitable for fiber length distribution. When output is higher, 0.75 mm- 1.0 mm gauge is suitable for fiber length distribution.

关 键 词：梳棉机 刺辊速度 道夫速度 后固定盖板隔距 纤维损伤 

分 类 号：TS103.223[轻工技术与工程—纺织工程]