甲烷部分氧化制合成气Ⅳ.镍铜催化剂的反应性能及影响因素的考察  被引量:7

Methane Partial Oxidation to Carbon Monoxide and Hydrogen Ⅳ. The Activity of Ni Cu Catalysts and the Search of Effect Factors

在线阅读下载全文

作  者:褚衍来[1] 李树本[1] 林景治[1] 杨得信[1] 张传卫[1] 

机构地区:[1]中国科学院兰州化学物理研究所羰基合成与选择氧化国家重点实验室

出  处:《分子催化》1996年第6期449-455,共7页Journal of Molecular Catalysis(China)

摘  要:对镍铜甲烷部分氧化催化剂的制备化学研究表明,在Al2O3、SiO2、MgO、TiO2、Y型分子筛等载体中,具有较好氢溢流功能的Al2O3所担载的镍铜催化剂,有最佳的反应性能,载体的产物溢流功能对反应中合成气的生成是有利的.对于NiO-CuO-Al2O3催化剂,组分Cu的最佳含量是Cu/Al=0.2/4(原子比),Ni/Al(原子比)在1/4-1.5/4范围内催化剂均保持最佳的反应性能,此时,甲烷转化率为98.1%,对CO、H2的选择性分别达97%、100%.制备方法对催化性能影响的结果显示,以(NH4)2CO3为沉淀剂的共沉淀法,是制备NiO-CuO-Al2O3催化剂的最佳方法.NiO-CuO-Al2O3催化剂的甲烷部分氧化性能在400-500℃间有一突跃,并在700℃时达到最佳值;过高的反应气空速对CO。Among the Ni Cu catalysts supported on Al 2O 3, SiO 2, MgO, TiO 2 and Y zeolite respectively, NiO CuO Al 2O 3 has the best catalytic activity for partial oxidation of methane to H 2 and CO, because Al 2O 3 has the best hydrogen spillover function useful for syngas production. The best composition of Ni Cu Al catalysts is Ni∶Cu∶Al=1 1.5∶0.2∶4(atom ratio), over this catalyst, 98.1% conversion to CH 4 and 97%, 100% selectivities to CO、 H 2 have been achieved. The NiO CuO Al 2O 3 catalyst prepared by coprecipitation using (NH 4) 2CO 3 as the precipitating agent shows the best catalytic activity. As the reaction temperature increases from 400℃ to 800℃, the catalytic activity of NiO CuO Al 2O 3 increases greatly and has the optimum value at 700℃. Extremely high space velocity is unfavorable for the syngas selectivity.

关 键 词:甲烷 合成气 氧化   催化剂 

分 类 号:O643.36[理学—物理化学] TE665.3[理学—化学]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象