基于Mold FIow软件优化设计注塑制件的浇口位置  

Design Optimization of Plastics Injection Mold Gates Based on Moldflow

作　　者：张强[1] 祝铁丽[1] 

机构地区：[1]大连理工大学模具研究所,辽宁大连116023

出　　处：《模具工程》2006年第12期58-61,共4页Mould &Die Project

摘　　要：本文通过塑料水杯和手机面板两个实例，利用MoldFlow强大的分析功能，对产品进行最佳浇口位置分析。在此基础上进行产品初步成型分析，在发现产品外观质量、强度、整体变形等方面存在的缺陷后，对浇口位置重新进行优化设计，最终获得了较为满意合理的浇口位置。Taking the plastic cup and the phone panel as an example,this paper presents strong of Moldflow and takes a analysis of most optimal gate location. On the basis,the initial moulding of panel has been done. With the exposure of defects in the following aspects： appearance quality,intensity and unitary deformation, an optimal design of gate location is newly done, and finally we can get a more satisfactory and reasonable gate location.

关 键 词：浇口位置 MOLDFLOW 优化设计 

分 类 号：TQ320.662[化学工程—合成树脂塑料工业]