非电传爆系统无起爆药传爆接头的性能研究  

The Performance of Detonating Connector with Non-primary Explosive in Non-electric Detonation Transfer System

作　　者：张枫[1] 杨树彬[1] 杨安民[1] 吴瑞德[1] 

机构地区：[1]中国兵器工业第213研究所,陕西西安710061

出　　处：《火工品》2006年第6期1-4,共4页Initiators & Pyrotechnics

摘　　要：为提高非电传爆系统的安全性,将猛炸药HNS-Ⅱ应用于系统输出端,研究了装药密度和限制性导爆索(CDF)埋入长度对输出性能的影响。研究表明采用合理的设计,限制性导爆索可以起爆HNS-Ⅱ,柔性导爆索(MDF)埋入长度为3～4mm、炸药密度在1.50～1.70g/cm3时输出传爆接头具有稳定的爆轰输出。In order to improve the safety of non-electric detonation transfer system, HNS- Ⅱ was used in the output of system The influence of charge density and length of encased CDF in explosive on detonation transfer performance were studied. Result showed that CDF can initiate HNS- Ⅱ. When the length of encased MDF in the HNS- Ⅱis from 3ram to 4mm, the density of the explosive is from 1.50g/cm^3 to1.70g/cm^3, the system has stable detonation transfer capability.

关 键 词：非电传爆系统 HNS 传爆性能 限制性导爆索 

分 类 号：TJ455[兵器科学与技术—火炮、自动武器与弹药工程]