提高细纱条干均匀度的工艺优化配置  

Processing Optimization Configuration of Enhancing Spinning Evenness

作　　者：邵珠莲[1] 刘承晋[1] 

机构地区：[1]滨州职业学院

出　　处：《棉纺织技术》2007年第1期9-12,共4页Cotton Textile Technology

摘　　要：为了提高细纱条干均匀度,全面分析了细纱工艺与成纱条干均匀度的关系,并对影响成纱条干均匀度的关键工艺进行了优化试验。结果表明:采用较小的前区罗拉隔距、较小的钳口隔距及较大的前胶辊加压,适当增加粗纱捻系数,使用不处理软胶辊,增大胶辊直径等措施,可以提高成纱条干均匀度。To enhance spinning evenness and analyze the relation between spinning processing and yam evenness, key processing of influence on evenness were optimizeel. Through adopting smaller front zone roller gauge, smaller nip gauge and bigger front top roller pressure, bigger roving twist factor, non-treatment top roller, bigger top roller diameter and so on, yarn evenness can be enhanced.

关 键 词：牵伸 条干均匀度 罗拉隔距 钳口隔距 胶辊 

分 类 号：TS114.2[轻工技术与工程—纺织材料与纺织品设计]