硅酸铝短纤维增强ZL108复合材料热处理组织  

Effects of Heat Treatment on Microstructure of Aluminosilicate Short Fiber Reinforced ZL108 Composites Prepared by Squeezing Casting

作　　者：刘政[1] 刘小梅[1] 朱应禄[1] 

机构地区：[1]江西理工大学材料与化学工程学院

出　　处：《特种铸造及有色合金》2007年第2期139-141,共3页Special Casting & Nonferrous Alloys

摘　　要：研究了热处理工艺对挤压铸造制备的硅酸铝短纤维增强ZL108合金复合材料组织的影响。试验结果表明,热处理能改善复合材料的显微组织。热处理保温时间适当延长可使得复合材料组织变得细小。另外,热处理温度与制备复合材料的冷却速度增大会导致复合材料热处理后新相组织的产生,这是由于冷却速度的增大导致共晶温度下降引起的。Effects of heat treatment on microstructure of aluminosilicate short fiber reinforced ZL108 composites prepared by squeezing casting have been observed. The results reveal that the heat treatment can improve the microstructure of the composites. With increasing in holding time, the grain size in the microstructure of the composites becomes finer and finer. In addition, the creation of new phase in the heat treated composites can be found with increasing in heat treated temperature and cooling rate , which is attributed to the increase of cooling rate resulting in the decrement of eutectic growth temperature.

关 键 词：ZL108合金 硅酸铝短纤维 复合材料 热处理 冷却速度 

分 类 号：TG156[金属学及工艺—热处理]