基于GPIB总线的GSM移动电话发射功率自动校准系统  

GPIB Bus-based GSM Mobile Transmit Power Auto Calibration System

作　　者：赖耀昌[1] 高新波[1] 刘书泽[1] 

机构地区：[1]西安电子科技大学电子工程学院,陕西西安710071

出　　处：《现代电子技术》2007年第4期35-38,共4页Modern Electronics Technique

摘　　要：全球移动通信系统协议规定,移动电话的发射功率是可以被基站控制的。为了使系统内的所有终端的功率控制达到一致,就必须对每台移动电话按照GSM规范的要求进行功率校准。介绍了GSM移动电话发射功率自动校准的基本原理,给出了GPIB总线下一套GSM移动电话发射功率自动校准系统的实现方案。在GSM规范的指导下,提出了一种补偿数组的自校准方法,分别对GSM900和DCS1800频率段的每一功率等级的发射功率进行了精确而快速的校准。Global system for mobile communication protocol regulates that the transmission power of mobile is controlled by base station. In order to make the power control of all terminal in system identically,the power of each mobile must be calibrated according to the requirement of GSM criterion. This paper introduces the auto calibration principle of GSM mobile transmission power,and presents an implementation scheme of auto calibration system for GSM mobile transmit power based on GPIB bus. Under the guidance of the GSM criterion,a compensation array method is put forward, which can be used to accurately calibrate the transmission power of every level in GSM900 and DCS1800 frequency band separately.

关 键 词：GPIB GSM 发射功率 自动校准 

分 类 号：TN914[电子电信—通信与信息系统]