无机膜处理乳化废水中试研究  

A Pilot Study of Treatment of Emulsified Wastewater with Inorganic Membrane

作　　者：张世光[1] 刘有智[1] 谷磊[1] 申红艳[1] 

机构地区：[1]中北大学化学工程技术研究中心,太原030051

出　　处：《化工生产与技术》2007年第1期52-54,共3页Chemical Production and Technology

摘　　要：为除去废水中的乳化油,采用无机陶瓷微滤膜对乳化废水进行了中试实验研究。实验结果表明:乳化液废水经孔径为200nm的无机陶瓷膜处理后,透过液可达国家排放标准;在最佳操作压力0.16MPa下,系统可连续、稳定运行20h以上,平均膜通量为272L/(m·2h);化学清洗30min后,可使膜通量恢复至初始通量的95%;平均料液运行成本为4.49元/m3。用无机陶瓷膜处理乳化液废水是一种经济、技术可行的方法。A pilot study has been done to remove emulsified fuel.In order to reach the national discharging standard,inorganic ceramic membrane is used to dispose emulsified fuel.The results show that emulsified fuel can be removed basically with 200 nm inorganic ceramic membrane,and the infiltration liquid reach the national discharging standard.At the 0.16 MPa(optimal operation pressure),experiment can circulate 20 h continuously and steadily,and its average membrane permeability is 272 L· m-2·h-1.After cleaning 30 min,restore the membrane's standard permeability to higher than 95% of the original permeability.It is estimated that the average liquid running cost is 4.49 $/m3.The results show that disposing emulsified wastewater with inorganic ceramic membrane is economic and feasible.

关 键 词：无机膜 乳化液废水 膜通量 膜污染 

分 类 号：X703.1[环境科学与工程—环境工程]