Fe_(39.4-x)Co_(40)Si_9B_9Nb_(2.6)Cu_x纳米晶合金的有效磁各向异性研究  

The effective magnetic anisotropy of nanocrystalline Fe_(39.4-x)Co_(40)Si_9B_9Nb_(2.6)Cu_x alloys

作　　者：韩献堂[1] 王治[1] 马晓华[1] 王光建[2] 

机构地区：[1]天津大学理学院,天津300072 [2]河北工程大学理学院,邯郸056038

出　　处：《物理学报》2007年第3期1697-1701,共5页Acta Physica Sinica

基　　金：国家自然科学基金(批准号:50271047);天津市自然科学基金资(批准号:003601811)资助的课题.~~

摘　　要：采用多晶材料趋近饱和定律研究了非晶Fe39.4-xCo40Si9B9Nb2.6Cux(x=0.5,1,1.5)合金在不同温度纳米晶化后的有效磁各向异性常数〈K〉.结果表明,Cu含量较低(x=0.5)时,纳米晶粒较大并且在较低的退火温度(550℃)下析出硬磁相,〈K〉随退火温度Ta升高显著增加;随着Cu含量的增加,有效地细化了晶粒,并且抑制了硼化物的析出,〈K〉明显减小.讨论了〈K〉与晶粒尺寸D及初始磁导率的关系.The effective magnetic anisotropy 〈 K〉 of nanocrystalline Fe39.4- x Co40 Si9B9 Nb2.6 Cux （ x = 0.5,1,1.5） alloys annealed at different temperatures was investigated based on the law of approach to saturation at room temperature. The experimental results showed that the grain size D of samples with low content of Cu （ x = 0.5） is larger and a hard magnetic phase precipitated from the residual amorphous matrix at lower annealing temperature which lead to a higher value of 〈 K〉. And with increasing content of Cu, which effectively refined the grains and retarded the formation of borides at x ≥ 1, a clear drop tendency of 〈 K〉 was observed. The correlation between 〈 K〉 and D as well as 〈 K〉 and initial permeability μi was also discussed.

关 键 词：纳米晶 有效磁各向异性 磁导率 FeCo基合金 

分 类 号：O482.5[理学—固体物理]