熔融还原法冶炼高速钢  

On Smelting Reduction Process of High Speed Steel

作　　者：李正邦[1] 

机构地区：[1]钢铁研究总院,北京100081

出　　处：《中国钨业》2007年第1期11-15,38,共6页China Tungsten Industry

基　　金：国家高技术研究发展计划(863计划)(2003AA33X030);国家自然科学基金项目(50374033)

摘　　要：对用白钨矿、氧化钼和钒渣冶炼高速钢进行了热力学和动力学的计算与分析。在熔融还原过程中,CaWO3、MoO3、V2O5将被C、CaC2、Si—Fe、SiC还原。反应过程包括:固—固反应、液—固反应、铁浴反应和液—液反应。开发了低温快速还原、控制渣量、抑制沸腾等技术。还原WO3的限制性环节是WO3在熔渣中的扩散,改善渣的流动性,扩大反应界面能加快WO3的还原;使用阻尼剂能有效抑制钼的挥发。用20t的AC电弧炉还原氧化钨矿工业化生产高速钢M-2已取得成功,具有质量高、缩短工序、节约资源、降低能耗、提高成品率和改善环境等优点。综合上述功效,生产每吨M-2钢可节约成本6071元。应用这一新技术,重庆特钢公司累计生产M-2钢7981t。The smelting reduction process of scheelite,molybdenum oxide and vanadium slag is considered by thermodynamic and kinetic calculation and analysis. The scheelite, molybdenum oxide and vanadium slag can be reduced by C,CaC2, Si-Fe and SiC in the smelting reduction process. The reduction process consist of solid-solid reaction, liquid-solid reaction, reaction in molten steel and liquid-liquid reaction. The technology can realize fast reduction in low temperature, control amount of slag and restrain boiling during reduction stage.The diffusion of WO3 is the restrictive step of reduction process of WO3.Improving fluidity of slag and enlarging areas of reaction interface can accelerate reduction process of WO3.The use of damping preparation can restrain volatilization of molybdenum oxide effectively.The industrial trial making of M-2 high speed steel with oxide has been conducted successfully in 20 t AC-EAF.Enjoying the advantages of short working procedures,resources economical, minimal energy consumption and environment friendly,the process can save 6071 Yuan per ton.Chongqing Special Steel Corporation has produced 7981 tons of M-2 high speed steel applying this new technology.

关 键 词：熔融还原 高速钢 铁浴还原 低温快速还原 

分 类 号：TF746[冶金工程—钢铁冶金]