新型蒽基二胺类空穴传输材料的合成和性能研究  

Study on synthesis and properties of 9,10-anthryldiamine derivatives as a novel hole transport material

作　　者：韩巧玲[1] 张玉祥[1] 李仙迎[1] 任向涛 

机构地区：[1]西安建筑科技大学理学院,陕西西安710055 [2]西安瑞联近代电子材料有限责任公司,陕西西安710065

出　　处：《化学试剂》2007年第3期138-140,共3页Chemical Reagents

基　　金：西安市重大科技创新工程资助项目(GG04008)

摘　　要：以9,10-二溴蒽和芳基二胺为原料,在叔丁醇钠、Pd(OAc)2/P(t-Bu)3催化体系下合成了4种蒽基二胺衍生物。研究了反应温度、反应时间、催化剂量比的影响,确定最佳反应条件为:以无水二甲苯为溶剂回流反应3 h,Pd(OAc)2∶P(t-Bu)3=1∶1.2(物质的量比),n(P(t-Bu)3)∶n(二溴蒽)为0.48%;元素分析、GC-MS1、HNMR等表征了结构;DSC(差示扫描量热仪)测定了其玻璃化转变温度和熔点,结果显示它们均具有良好的热稳定性。Four novel 9, 10-anthryldiamine derivatives were synthesized using 9, 10-dibromoanthracene and four different arylamine compounds as raw materials in the presence of a catalyst system consisting of sodium tert-butoxide and Pd （ OAc）2/P （ t- Bu）. The influence of reaction temperature, reaction time and the dosage of catalyst was studied in detail. The best reaction conditions were：a reflux time of 3 h,a ratio of n（Pd（OAc）2）： n（P（ t- B u）3） = 1：1.2,and a ratio of n（P（t-Bu）3）：n （9, 10-dibromoanthracene） = 0.48%. Structural analysis was carried out by means of elementary analysis, GC-MS, ^1HNMR, etc. The glass transition temperature of these compounds was determined by DSC to show their good thermal stability.

关 键 词：空穴传输材料 高玻璃化转变温度 蒽基二胺衍生物 Pd(OAc)2/P(t-Bu)3催化 

分 类 号：O625.15[理学—有机化学]