操作条件对锡反射炉熔炼热力学过程的影响分析  

Analysis of the Operation Condition's Effect on the Tin Reverberatory Smelting Thermodynamics Process

作　　者：曾青云[1] 周立[1] 曾小青[2] 

机构地区：[1]江西理工大学材料与化学工程学院,江西赣州341000 [2]长沙理工大学管理学院,长沙410076

出　　处：《江西理工大学学报》2007年第1期7-10,共4页Journal of Jiangxi University of Science and Technology

基　　金：国家自然科学基金(50364004);江西省自然科学基金(0250026)

摘　　要：利用已建立的锡反射炉熔炼热力学过程计算机模型,首次研究了熔炼温度、焙砂锡品位及还原煤量对Sn、Fe、Pb、Zn、C等元素或组分分别在粗锡、炉渣及炉气相中分配行为的影响．模拟结果表明,熔炼反应最佳温度为1500K,当到达这一温度后,再提高炉温对反应过程的优化并无明显贡献,提高入炉焙砂的锡品位及还原煤量均对提高粗锡品位及锡回收率有利．On the basis of the Tin reverberator smelting thermodynamics process computer simulation model, the research was taken in what influences the smelting temperature, tin tenor in roasted product and reduction coal ca- pacity would do to the distribution of the main elements or components just like Pb, Zn, C, O in the grossly tin, slag and gas phase. The simulated result indicated that the best smelting temperature is 1500 K. Higher temperature did not occupy obvious distribution on the process optimization. Both rising the tin tenor of roasted product in the furnace and enhancing the reduction coal quantity can enhance tin tenor of coarse tin and tin recovery.

关 键 词：锡 反射炉熔炼 热力学 计算机模拟 

分 类 号：TF814[冶金工程—有色金属冶金]