木器用水性涂料涂布量对漆膜耐磨性的影响  

Influence of Coatings Coverage of Waterborne Furniture Coatings on Abrasion Resistance of Film

作　　者：路则光[1] 申利明[1] 黄河浪[1] 陈秀兰[1] 吴新凤[1] 薛丽丹[1] 

机构地区：[1]南京林业大学木材工业学院,南京210037

出　　处：《涂料工业》2007年第3期56-58,61,共4页Paint & Coatings Industry

摘　　要：以设计的涂布量对砂磨的硬枫薄木贴面家具板件喷涂两遍水性封闭底漆、底漆和面漆。漆膜固化后,测试漆膜的耐磨性。结果表明,在一定程度上,封闭底漆的涂布量对耐磨性影响较大,底漆次之,面漆影响最小。当封闭底漆的每遍涂布量为60 g/m2、底漆的每遍涂布量为100 g/m2和面漆的每遍涂布量为120 g/m2时,漆膜具有较好的耐磨性。Veneered maple furniture panels are sanded, then two coats of waterborne sealer, primer and top coat are sprayed on. The abrasion of surface coatings is tested. The results show that coverage of the coatings is critical as the following sequence ： sealer, primer and top coat to the abrsion of surface coatings, When the coverage of one coat of sealer is 60 g/m^2, primer 100 g/m^2, and top coat 120 g/m^2 respectively, the abrasion of surface coatings is the best.

关 键 词：水性涂料 涂布量 漆膜耐磨性 

分 类 号：TQ639[化学工程—精细化工]