微波场中不同配碳量钛精矿的吸波特性  

Microwave-absorbing characteristics of mixtures about different proportions of carbonaceous reducer and ilmenite in microwave field

作　　者：黄孟阳[1] 彭金辉[1] 黄铭[2] 张世敏[1] 李雨[1] 雷鹰[1] 

机构地区：[1]昆明理工大学材料与冶金工程学院,昆明650093 [2]云南大学信息学院,昆明650093

出　　处：《中国有色金属学报》2007年第3期476-480,共5页The Chinese Journal of Nonferrous Metals

基　　金：2003年攀枝花重点资助项目(2003GX-2)

摘　　要：采用微波谐振腔微扰法测定了碳质还原剂和钛精矿混合物料的吸波特性,研究了碳质还原剂配入钛精矿不同比例时混合物的吸波特性与材料的复介电常数(ε″)、微波场内热源强度p的关系。分析结果表明:当粒度为147～175μm时,钛精矿的吸波特性优于椰壳碳、焦碳和无烟煤的;且通过比较复介电常数的大小确定了椰壳碳和钛精矿最佳配比为20%,焦碳和钛精矿最佳配比为14%,无烟煤和钛精矿最佳配比为5%;并在此配比条件下得到了ε″和p的最大值。The microwave-absorbing characteristics of the mixtures about carbonaceous reducer and ilmenite were measured by the technique of microwave cavity perturbation and the relationships between p and the microwave-absorbing characteristic of the mixtures were studied. The results indicate when the particles sizes of the mixtures are 147-175 μm, the microwave-absorbing characteristic of ilmenite is better than those of coconut carbon, coke and anthracite. And the optimal proportions of coconut carbon and ilmenite coke, ilmenite anthracite and ilmenite are defined as 20%, 14% and 5%, respectively, ε″ andp reach up to the maximums under the above conditions.

关 键 词：钛精矿 配碳量 碳质还原剂 吸波特性 

分 类 号：TF19[冶金工程—冶金物理化学] TF823