Investigation of basic properties of fly ash from urban waste incinerators in China  

作　　者：JIANG Jian-guo XU Xin WANG Jun YANG Shi-jian ZHANG Yan 

机构地区：[1]Department of Environmental Science and Engineering, Tsinghua University, Beifing 100084, China. [2]Shanghai Environment and Science Academy, Shanghai 201203, China

出　　处：《Journal of Environmental Sciences》2007年第4期458-463,共6页环境科学学报（英文版）

基　　金：Project supported by the Hi-Tech Research and Development Program (863) of China (No. 2002AA644010); the National Tenth-Five Year Program of China (No. 2003BA604A-11-07).

摘　　要：Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence （XRF）, scanning electron microscopy （SEM）, X-ray diffraction （XRD）. The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements （〉10000 mg/kg, listed in decreasing order of abundance） in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements （1000 to 10000 mg/kg） include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L （Pb） and from 0.049 to 164.90 mg/L （Zn）, mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkaliBasic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence （XRF）, scanning electron microscopy （SEM）, X-ray diffraction （XRD）. The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements （〉10000 mg/kg, listed in decreasing order of abundance） in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements （1000 to 10000 mg/kg） include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L （Pb） and from 0.049 to 164.90 mg/L （Zn）, mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali

关 键 词：urban waste INCINERATOR fly ash heavy metals leaching toxicity 

分 类 号：X705[环境科学与工程—环境工程]