回收电镀污泥中镍和铜的研究  

Research about Recovery Nickel and Copper from Electroplating Sludge

作　　者：安显威[1] 韩伟[1] 房永广[2] 

机构地区：[1]武汉理工大学资源与环境学院,湖北武汉430070 [2]武汉理工大学材料学院国家重点实验室,湖北武汉430070

出　　处：《华北水利水电学院学报》2007年第1期91-93,共3页North China Institute of Water Conservancy and Hydroelectric Power

摘　　要：从资源利用的角度来分析电镀污泥中含有金属的去除和回收利用问题,通过酸浸—置换—氧化—沉淀等工艺来回收污泥中的镍和铜.结果表明,本工艺制得的硫酸镍产品中含镍16%-18%,镍的回收率为80%,铜的回收率达85%,品位为90%.该过程中产生的浸渣经固化后,可作为普通建筑填料使用.The removing and utilizating problem of the metal of electroplating sludge is analyzed, nickel and copper are recovered from electroplating sludge through acid leaching-replacement-oxidation-sedimentation processes. Experimental result shows that the nickel sulphate product contains 16% - 17% of nickel and the grade is 80% , recovery rate of copper is more than 85% and the grade is 90% .,The solidification residue could be reused as common building material.

关 键 词：电镀污泥 酸浸 镍和铜的回收 

分 类 号：X703[环境科学与工程—环境工程]