嵌入式操作系统Windows CE下触摸屏驱动的开发  

The Oevelopment of Touch Panel driver Under the Embedded Operating System Wince

作　　者：陈艳[1] 李茜[1] 杨峰[2] 黄鹏[3] 

机构地区：[1]陕西科技大学电气与电子工程学院,咸阳712081 [2]西安工业大学计算机科学与工程学院,西安710069 [3]西北大学电子科学系,西安710069

出　　处：《微计算机应用》2007年第4期438-441,共4页Microcomputer Applications

摘　　要：触摸屏作为终端与用户交互的媒介已经逐渐取代键盘成为嵌入式计算机系统的输入设备,而触摸屏的应用是建立其驱动程序之上,所以研究触摸屏驱动程序的开发就有了重要的意义。本文针对S3C2440的触摸屏模块完成了其Windows CE下驱动程序的开发,在Platform Builder4.2下进行驱动代码的编写、编译,并通过软硬件交叉环境进行调试,最终完成了触摸屏驱动程序的开发。As the medium among terminal and user communication, the touch panel has gradually replaced keyboard to be the inputting equipment of the embedded computer systerm, and the application of touch panel is based on its drive procedure, so it is very meaningful to research on the drive procedure of touch panel. The article aiming at S3C2440 touch panel module has finished the exploitation of the drive procedure under Windows CE, has written driver code, complied, and debugged it through software and hardware crossing compiling under Platform Builder 4.2, finally has finished the exploitation of the drive procedure of touch panel.

关 键 词：Windows CE S3C2440 驱动程序 

分 类 号：TP311.11[自动化与计算机技术—计算机软件与理论]