石家庄钢铁公司高炉内碱金属循环  

Study on Alkali Metals Recycle in Blast Furnace of Shi Gang

作　　者：张勇[1] 吕庆[1] 李福民[1] 

机构地区：[1]河北理工大学冶金与能源学院,河北唐山063009

出　　处：《河北理工学院学报》2007年第2期32-38,共7页Journal of Hebei Institute of Technology

摘　　要：石家庄钢铁公司高炉的碱金属(K_2O+Na_2O)负荷较高,为5．25～5．5kg/tFe。其中由烧结矿带入的碱金属占碱金属负荷的70％左右,球团矿和焦炭各占碱金属负荷的10％左右,其它炉料带入量较少。石钢高炉总排碱率为73％～79％,其中炉渣排碱率为68％～77％,炉顶煤气排碱率为5％左右。石钢高炉蓄积率保持在0．227～0．282kg/Fe·h之间,高炉处于蓄积期,且蓄积率较高。所以,建议石钢高炉的碱金属负荷临界值选取4．0kg/tFe。The alkali metals loads of ShiGang blast furnace were high ,between 5.2 kg/tFe to 5.5kg/tFe. Among it, the alkali metals in the sinter was 69% ,either pellet or coke was about 10% ,other charges were little. The total removing alkali rate of ShiGang BFs were 73% to 79%. Among it, removing alkali metals rate of slag is 68% to 77% and top gas is 5%. The accumulation rates of the alkail metals of ShiGang BFs were 0.22kg/tFe. h to 0.28kg/tFe. h and BFs were in accumulation age ,Thus it suggested that ShiGang critical alkail metals load is 4.0kg/tFe.

关 键 词：高炉 碱金属 碱平衡 

分 类 号：TF549[冶金工程—钢铁冶金]