电火花线切割加工中断丝后的有效工艺处理  

The Processing Methods Dealing with the Wire Breakage of WEDM

作　　者：王冬生[1] 贾宝贤[1] 王春明 

机构地区：[1]哈尔滨工业大学(威海)汽车工程学院,山东威海264209 [2]山东威海海马地毯厂,山东威海264200

出　　处：《电加工与模具》2007年第B04期45-47,共3页Electromachining & Mould

摘　　要：给出了DK7740E数控电火花线切割机加工过程中出现断丝故障后的几种相应措施,对指导实际的线切割加工工艺过程具有积极的指导意义。When the WEDM processing was taken place on the DK7740E NC machine tools, several processing methods dealing with the wire breakage of WEDM had been given in this paper. These methods can instruct practical application in WEDM.

关 键 词：线切割加工 断丝 工艺措施 

分 类 号：TG661[金属学及工艺—金属切削加工及机床]