氧化铜纯度检测实验方法的探讨  

Discussion on the Determination of the Purity of Cupric Oxide Mineral

作　　者：杨启如[1] 杜刚霞[2] 郑京京[1] 

机构地区：[1]武汉理工大学化学工程学院,武汉430070 [2]湖北中医学院药学院,武汉430000

出　　处：《装备环境工程》2007年第2期45-46,84,共3页Equipment Environmental Engineering

摘　　要：利用化学溶解法和碘量法测定氧化铜含量,主要研究了氧化铜纯度检测实验方法,采用了3种氧化铜样品的处理方法,探讨不同试验条件对测定结果的影响,确定了最佳测定方法。Chemical solution and iodine content methods were applied to determine the content of cupric oxide. The influence of the treatment methods and condition of solving cupric oxide mineral was studied. The optimal condition of solving cupric oxide mineral and dropping was found.

关 键 词：氧化铜矿 处理 纯度 

分 类 号：O6-332[理学—化学]