工艺参数对Al-Ti-B中间合金第二相粒子的影响  

Effects of Processing Parameters on the Second Phase Particles in Al-Ti-B Master Alloys

作　　者：李保平[1] 李智[1] 王建华[1] 王鑫铭[1] 程桃祖[1] 苏旭平[1] 

机构地区：[1]湘潭大学机械工程学院

出　　处：《特种铸造及有色合金》2007年第4期317-319,共3页Special Casting & Nonferrous Alloys

基　　金：湘潭大学跨学科交叉项目资助(051ND07)

摘　　要：研究了静置时间和加料顺序对铸态Al-Ti-B中间合金第二相粒子形成规律的影响。试验结果表明,随着静置时间的延长,TiAl3的尺寸逐渐增大,在铝基体中的分布更为均匀,且粒子的大小更趋于一致。3种不同的加料顺序中,先加KBF4后加K2TiF6,中间合金中的TiAl3尺寸最大,而混合加盐时TiAl3尺寸最小。TiB2粒子主要分布α-Al边界处,少量分布在TiAl3表面上,静置时间对TiB2粒子分布无影响。Effects of holding time and sequence of adding halide salt on formation of second phase particles in as-cast Al-Ti-B master alloy have been investigated. With postponing the holding time, the TiAl3 particle grows with more uniform distribution in the Al matrix and trending towards the same size. For three kinds adding sequence of halide salt, the maximum TiAl3 particle size can be observed with firstly adding B salt then Ti salt, while the minimum TiAl3 particle size occurs in the master alloy with adding mixed salt. Major TiB2 particles are distributed into the boundary of α-Al phase with the minor on the surface of TiAl3 particle. The effects of holding time on distribution of TiB2 particles can be ignored.

关 键 词：Al—Ti—B中间合金 静置时间 加盐顺序 第二相粒子 

分 类 号：TG113.1[金属学及工艺—物理冶金]