检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]北京工业大学传热强化与过程节能教育部重点实验室及传热与能源利用北京市重点实验室,北京100022
出 处:《化工学报》2007年第5期1127-1131,共5页CIESC Journal
基 金:国家重点基础研究发展计划项目(G2000026300)~~
摘 要:采用缝隙测压这种在通道上直接测量压力的方法,测量了内径从0.330mm变化到0.580mm的小通道内突然扩大和突然缩小的局部阻力特性。结果表明,缝隙测压方式是一种可行的压力测量方法;与常规通道的实验结果相比,在层流阶段,小通道内液体流动具有较小的突扩局部阻力系数以及较大的突缩局部阻力系数;而在湍流阶段,小通道内液体流动的突扩和突缩局阻系数与常规通道的实验结果相同。Local resistances caused by abrupt expansion and contraction were experimentally investigated for the small channels with diameters from 0. 330 mm to 0. 580 mm by using a novel pressure measurement method of the tiny gaps on the channels. The experimental results showed that the pressure measurement method through the gaps was a feasible method for small channels. For laminar flow, the expansion loss coefficient was much lower and the contraction loss coefficient was much higher as compared with the experimental results of conventional channels, while for turbulent flow, the expansion and contraction loss coefficients were consistent with those of the conventional channels.
分 类 号:TK124[动力工程及工程热物理—工程热物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222