液晶显示器后盖注射模浇注与冷却系统设计  

Design of gating and cooling system in injection mould for LCD rear cover

作　　者：肖正明[1] 刘建雄[1] 廖丕博[1] 詹肇麟[1] 

机构地区：[1]昆明理工大学机电学院,云南昆明650093

出　　处：《模具工业》2007年第5期60-64,共5页Die & Mould Industry

摘　　要：分析了液晶显示器后盖成型工艺,在模拟流动分析的基础上,确定了注射模的浇口位置和流道系统。根据显示器后盖结构设置3个冷却水道设计方案,运用CAE技术分析比较各个方案的冷却效果和结构特点,最终优化出理想的冷却系统。The forming process for an LCD rear cover was analyzed. The sprue gate location and runner system were decided based on the simulated flow analysis. Three design schemes for cooling water way were designed. The cooling effect and structural characteristics were investigated and compared by using CAE technology, and then an optimized cooling system was achieved.

关 键 词：液晶显示器 注射成型 浇注系统 冷却系统 

分 类 号：TQ320.662[化学工程—合成树脂塑料工业]