硅铝二元膜包覆稀土发光材料的结构及耐水性能的研究  

Structure and Water-resistance of Rare-earth Luminescent Materials Coated with Si and Al

作　　者：罗勇悦[1] 彭蕾蕾[1] 淡宜[1] 张立[2] 赵昆[2] 

机构地区：[1]高分子材料工程国家重点实验室(四川大学)四川大学 高分子研究所,成都610065 [2]四川新力集团实业有限公司,成都610031

出　　处：《无机材料学报》2007年第3期499-503,共5页Journal of Inorganic Materials

基　　金：国家自然科学基金(20374036);四川省科技攻关项目(04GG009-010-2);长江学者创新团队发展计划

摘　　要：采用溶胶-凝胶法制备硅铝二元膜包覆稀土发光材料．通过扫描电镜、X光电子能谱、比表面、多晶X射线衍射、荧光光谱和发光亮度的测试,研究了材料的结构、包覆层与原始发光材料的相互作用及材料发光性能;进一步通过pH值测定,考察了材料的耐水性．结果表明,包覆层以无定型态与原始发光材料以化学作用结合,而不是简单的物理包覆;在原始发光材料表面包覆一层均匀的硅铝二元膜,可有效提高材料的耐水性能,而对材料的发光性能影响不大．The rare-earth luminescent materials coated with Si and Al were prepared by the sol-gel route. The result of FL measurement indicates that the coated sample has the similar luminescent properties to that of the uncoated. The compositions, microstructure, texture and surface morphology of the binary films containing Si and Al elements were investigated by SEM,XRD,BET and XPS. Waterresistance of the coated and uncoated samples was evaluated by measuring the pH of water in which the samples were dispersed. The results show that a thin dense binary film containing Si and Al elements forms on the surface of the sample through chemical interactions, which can enhance the uncoated sample＇s stability under water-containing conditions.

关 键 词：稀土发光材料 溶胶-凝胶 包覆 结构 

分 类 号：TQ422[化学工程]