检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:魏秋平[1] 余志明[1] 马莉[2] 游小龙[1] 丰杰 吴晓斌[1] 刘王平[1]
机构地区:[1]中南大学材料科学与工程学院,长沙410083 [2]中南大学粉末冶金国家重点实验室,长沙410083
出 处:《中国有色金属学报》2007年第5期775-782,共8页The Chinese Journal of Nonferrous Metals
摘 要:采用超高真空热丝化学气相沉积(HFCVD)系统,以甲烷和氢气为反应气体,在YG13(WC-13%Co)硬质合金基体上沉积金刚石薄膜。用场发射扫描电子显微镜(FESEM)和X射线衍射仪(XRD)对金刚石薄膜进行检测分析,研究YG13经950℃、3h硼化预处理后沉积气压对金刚石薄膜形貌和生长织构的影响;通过压痕法比较硼化与二步法两种预处理方法对金刚石薄膜附着性能的影响。结果表明,基体经硼化预处理后表面形成CoB、CoW2B2、CoW3B3相;当沉积温度为750~800℃,碳源浓度为3.3%时,薄膜表面形貌和生长织构随着沉积气压改变有明显的变化;硼化预处理后所得样品在1500N载荷下压痕表现出良好的附着性能,较二步法预处理更加有效地改善了膜-基附着性能。The diamond films were deposited on boronized WC-13%Co substrates via hot filament chemical vapor deposition in a reactor with a background pressure of 10^-6 Pa. The surface morphology, texture and adhesion of the diamond films were investigated by means of field emission scanning electron microscope, X-ray diffractrometry and Rockwell hardness tester, respectively. The results show that a surface layer of stable cobalt borides of CoB, CoW2 B2 and CoW3B3 formed at 950 ℃ can effectively reduce the diffusion of Co to the surface of cemented carbide substrates when diamond films are deposited. The surface morphology and texture of the diamond films are remarkably affected by the ambient pressure when the substrate temperature is 750-800℃ and the percent of CH4 is 3.3%. Compared with the two-step pretreatment, the boronizing is much better pretreatment to improve the adhesion.
分 类 号:TG135.5[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222