微波诱导过氧化氢氧化处理含油废水  

Microwave Induced Oxidation Process With H_2O_2 for Oiliness Wastewater Treatment

作　　者：张金生[1] 关晓彤[1] 李丽华[1] 

机构地区：[1]辽宁石油化工大学石油化工学院,辽宁抚顺113001

出　　处：《辽宁石油化工大学学报》2007年第2期7-9,共3页Journal of Liaoning Petrochemical University

摘　　要：采用微波诱导氧化工艺(MIOP)处理含油废水,分别考察了活性炭种类、活性炭质量、H2O2体积、微波功率、微波辐射时间和pH等因素对处理效果的影响。实验结果表明,微波诱导氧化对含油废水COD的去除率达到86.8%。最佳处理工艺条件为:5 g活性炭与50 mL含油废水混合(固液质量比为1∶10),微波功率为480 W,辐射时间为4 min,H2O2体积为1.5 mL,FeSO4质量为0.07 g,pH为3。Oiliness wastewater was treated by microwave induced oxidation （MIOP）. The effects of kinds of activated carbon, quality of activated carbon, volume of H2O2, microwave power, irradiation time and pH on COD removal rate were investigated. The results show that COD removal rate of oiliness wastewater under MIOP can reach 86. 8%. The optimal conditions of operation are as follows： 5.0 g activated carbon, mixed with 50 mL oiliness wastewater （mass ratio of solid and liquid is 1 ： 10）, microwave power is 480 W,irradiation time is 4 min, H2O2 volume is 1.5 mL , FeSO4 mass is 0.07 g, pH is 3.

关 键 词：微波诱导氧化工艺 活性炭 含油废水 FENTON试剂 

分 类 号：X703[环境科学与工程—环境工程]