超声挤出丙烯基塑性体／纳米SiO2复合材料的形貌与热性能研究  

Morphology and Thermal Properties of Propylene Based Plastomer/Nano-SiO2 Composites Prepared by Ultrasonic Extrusion

作　　者：彭波[1] 郭少云[1] 刘志明[1] 

机构地区：[1]高分子材料工程国家重点实验室、四川大学高分子研究所,四川成都610065

出　　处：《中国塑料》2007年第4期73-76,共4页China Plastics

摘　　要：在超声波作用下，熔融挤出制备丙烯基塑性体（DP）／纳米SiO2复合材料，并研究了超声波对复合材料微观形貌、动态力学性能和结晶性能的影响。结果表明：纳米SiO2的加入提高了DP的储能模量，降低了耗能模量，并促使DP在更高温度下结晶，结晶焓变小。而超声波的引入有助于纳米SiO2在DP基体中均匀分散，导致复合材料的耗能模量升高，但降低了储能模量和玻璃化转变温度，同时复合材料的结晶温度提高，结晶焓下降。By the aid of ultrasonic vibration, a novel propylene based plastomer （DP）/nano-SiO2 composite was prepared by means of melt blending. The effects of ultrasonic wave on morphology, dynamic mechanical properties, and crystallization properties of the composite were studied. Ultrasonic vibration promoted the dispersion of nano-SiO2 in DP matrix, thus increased the storage modulus and decreased of loss modulus. In addition, the presence of nano-SiO2 increased the crystallization temperature, however, the crystallization enthalpy decreased

关 键 词：超声波 丙烯基塑性体 纳米二氧化硅 复合材料 

分 类 号：TQ325.14[化学工程—合成树脂塑料工业]