检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张世超[1] 周科平[1] 古德生[1] 罗先伟[2]
机构地区:[1]中南大学,长沙410083 [2]华锡集团铜坑矿,柳州545000
出 处:《中国矿业》2007年第5期83-86,共4页China Mining Magazine
基 金:国家十五攻关项目(2003BA612A-10-1)
摘 要:针对复杂充填体下大型贫矿体的开采,用传统的采矿方法存在着矿柱不能安全高效回收、资源损失大、采场顶板控制困难、采空区处理技术难度大、成本高、易诱发大规模地压、矿山安全没有保障等一系列问题,对此中南大学采用了高分段中深孔崩矿顶板诱导崩落连续采矿法。通过在铜坑矿92号矿体的工业试验,该技术较传统采用的采矿方法有许多的优点,并取得了较好的技术经济指标,对类似矿体的开采有一定的指导作用。To mine large-scale poor orebody under complicated fillingbody, the traditional mining methods have a series of problems such as : lower safety and efficiency at mining the jamb, large sources loss, difficult to control stope's roof, hard difficulties with abandoned stope's disposal, high cost, easy to cause large-scale ground press, no safety guarantee to the mine, and ect, To solve these problems, Central-South University adopts mining by middling depth explosive bores with high subsections and derivation- al roof caving-successive mining method. Through the industrial trial on No. 92 orebody of Tongkeng Mine, the technology is proved to have many strongpoints than the traditional mining methods and it can get better technic and economic targets. It has instructional value to similar orebodies' mining.
关 键 词:复杂充填体 顶板诱导崩落 连续采矿 贫化损失率 铜坑矿
分 类 号:TD856.11[矿业工程—金属矿开采]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145