硅胶负载硫酸铁催化合成2-庚基-1,3-二噁戊烷  

Synthesis of 2-heptyl-1,3-dioxolane catalyzed by Fe_2(SO_4)_3/SiO_2

作　　者：许招会[1] 张世金[1] 程磊[1] 王甡[2] 

机构地区：[1]江西师范大学化学化工学院,南昌330027 [2]江西师范大学化工研究中心,南昌330027

出　　处：《食品科技》2007年第5期173-175,共3页Food Science and Technology

基　　金：江西师范大学青年成长基金(1341)

摘　　要：以正辛醛和乙二醇为原料,以硅胶负载硫酸铁[Fe2(SO4)3/SiO2]为催化剂,合成了2-庚基-1,3-二噁戊烷,考察了醛醇摩尔配比、反应时间、催化剂用量及其稳定性对产率的影响。实验表明,硅胶负载硫酸铁是合成2-庚基-1,3-二噁戊烷的理想催化剂,较优反应条件为正辛醛0.1mol、n(正辛醛)/n(乙二醇)=1.0/1.2(mol/mol)、催化剂的用量为反应物总质量的2.0%、带水剂环己烷12mL、回流反应4.0h,2-庚基-1,3-二噁戊烷的产率可达92.0%以上。2-heptyl-1,3-dioxolane was synthesized from n-octylaldehyde and ethylene glycol using by Fe2（SO4）3/SiO2 as catalyst. The factors influencing the synthesis were discussed and the better reaction conditions were found as follows： n-octylaldehyde 0.1mol, the molar ratio of n-octylaldehyde/ethylene glycol was 1.0/1.2（mol/mol）, the amount of catalyst was 2.0%, the amount of cyclohexane 12mL, reaction time 4.0h. The yield can reach over 92.0% under the better conditions.

关 键 词：2-庚基-1 3-二噁戊烷 正辛醛 乙二醇 硅胶负载硫酸铁 

分 类 号：TQ244[化学工程—有机化工]