唐钢1650mm可逆式冷带轧机液压AGC动态模型的建立与仿真  

Building and Simulation on Dynamic Models of Hydraulic AGC System in 1650mm Reversing Cold Strip Mill of Tangsteel

作　　者：张莉[1] 马韧宾[1] 张立静[1] 王立艳[1] 郑泽华[2] 

机构地区：[1]唐山科技职业技术学院,河北唐山063001 [2]唐山钢铁集团有限责任公司冷轧薄板厂,河北唐山063016

出　　处：《甘肃冶金》2007年第3期1-4,共4页Gansu Metallurgy

摘　　要：建立了唐钢1650 mm可逆式冷带轧机液压AGC系统的动态模型,仿真了系统参数变化对轧制厚度及系统的动态品质的影响。仿真结果与理论分析及实际工况相一致。结果表明,所建立动态模型简单且便于分析轧制过程中各种因素对最后轧制精度的影响。The dynamic models of hydraulic pressure screw-down system and describes simulation studies on the influences of the variations of some system parameters on the rolled thickness and the dynamic properties of the system. The results are identical with theory and operating condition in practice. The results show that the model is simple and beneficial to analyzing the influences of the processing factors on the thickness accuracy.

关 键 词：可逆式冷轧机 液压AGC 动态模型 

分 类 号：TG333.72[金属学及工艺—金属压力加工]