前驱体分子结构对聚糠醇基碳膜微结构及气体分离性能的影响  

Influence of Molecular Structure of Precursors on Microstructure and Gas Separation Performance of Carbon Membranes Derived from Poly(furfuryl alcohol)

作　　者：王秀月[1] 王同华[1] 宋成文[1] 曲新春[1] 

机构地区：[1]大连理工大学化工学院精细化工国家重点实验室碳素材料研究室,大连116012

出　　处：《高等学校化学学报》2007年第6期1143-1146,共4页Chemical Journal of Chinese Universities

基　　金：国家自然科学基金(批准号:20276008)资助

摘　　要：分别以草酸(OA)和碘(I)两种催化剂合成聚糠醇(PFA)前驱体制备气体分离碳膜.采用TG,FTIR和XRD对其微结构进行研究,并通过纯组分气体的渗透实验对碳膜的分离性能进行了探讨.研究结果表明,在热解过程中,两种结构的聚糠醇都是通过脱氧、重排、环化、芳构化等热分解和热缩聚反应逐渐转化为无定形的乱层碳结构,但热分解反应过程明显不同,所形成碳膜微结构的差异也很大.草酸催化剂制备的聚糠醇碳膜的微晶Lc值比碘催化剂制备碳膜的大,而d(002)和La值则比后者的小,表明草酸催化剂制备的聚糠醇碳膜碳微晶片层数多、排列规则、结构缺陷和孔隙均小于碘催化剂制备的聚糠醇碳膜,而且其气体分离选择性较高、渗透通量较小,表明聚糠醇的分子结构对所制备碳膜的微结构及气体分离性能有很大影响.Poly （ furfuryl alcohol） （PFA） synthesized over different catalysts （ oxalic acid and iodine） was used to prepare tubular C/CMS composite membranes. TG, FTIR and XRD were employed to characterize micro-structure change of carbon membranes during the pyrolysis. Gas separation performance of the carbon mem-branes was also investigated by molecular probe with pure gases. The results show that the original chemical structure of the two PFA are transformed to turbostratic carbon structure from cross-linking polymeric structure by a series of reactions such as cyclization and aromatization during the pyrolysis. Although they followed simi-lar pyrolysis behavior, the chemical reaction during the pyrolysis and the resultant microstructure of carbon membranes are different. In addition, d（002） and La of the carbon membranes polymerized over oxalic acid are smaller while Lc is larger than those polymerized over iodine. This indicates that the microstucture of carbon membranes polymerized over oxalic acid are more ordered and less defected than those polymerized over io-dine. Carbon membranes polymerized over oxalic acid show a higher permselectivity and lower permeability.

关 键 词：聚糠醇 碳膜 分子结构 气体分离 

分 类 号：O643[理学—物理化学] O626.1[理学—化学]