羧酸钠型离子交换纤维对Cu^(2+)的吸附性能研究  

Study on adsorptive property of carboxylic sodium ion exchange fiber for Cu^(2+)

作　　者：梁志宏[1] 原思国[2] 刘清[3] 赵林[1] 

机构地区：[1]河南省精细化工重点实验室,郑州450002 [2]郑州大学化工学院,郑州450052 [3]河南省分析测试中心,郑州450002

出　　处：《合成纤维工业》2007年第3期33-35,共3页China Synthetic Fiber Industry

基　　金：河南省自然科学基金资助项目(0511021400)

摘　　要：以腈纶、水合肼、氢氧化钠为原料制得羧酸钠型离子交换纤维,研究了该纤维对Cu2+的吸附性能。结果表明:羧酸钠型离子交换纤维的交换容量可达4．89 mmol／g,25℃下,pH为5．0时,20 min可达到饱和吸附;CuSO4溶液浓度为2．32 mmoL／L,床流速为2．7 BV／min,穿透吸附时的床体积为149．0时,该纤维对Cu2+的动态穿透沉淀和吸附容量为1．66 mmol／L;该纤维经5次再生后其交换容量由再生前的4．89 mmol／g升高到4．97 mmol/g,饱和吸附时再生纤维吸附容量达到再生前的95．6％,其再生性能良好。A carboxylic sodium ion-exchange fiber was produced using polyacrylonitrile fiber, hydrazine hydrate and sodium hydroxide as raw materials. The adsorptive capacity of the ion exchange fiber for Cu^2＋ was studied. The results showed that the exchange capacity of carboxylic sodium ion-exchange fiber could be 4.89 mmol/g, and the saturation adsorption could be achieved at 25℃, 5.0 pH value and 20 min. The dynamic penetrable sedimentation and adsorptive capacity of ion-exchange fiber for Cu^2＋ was 1.66 mmol/L when the concentration of CuSO4 solution was 2.32 mmol/L, the bed flow rate 2.7 BV/min and the bed volume for penetrable adsorption 149.0. The exchange capacity of the fiber was increased to 4.97 mmol/g from 4.89 mmol/g after regenerating 5 times. For saturation adsorption, the adsorption capacity of the fiber after regeneration was 95.6% as much as the value before regeneration. The fiber had fairly good regenerability.

关 键 词：离子交换纤维 聚丙烯腈纤维 羧酸钠 铜离子 吸附性能 

分 类 号：TQ028.15[化学工程] X703[环境科学与工程—环境工程]