基于ANSYS的挠性接头有限元模型的建立  

Finite Element Modeling of Flexible Joint Based on ANSYS

作　　者：吴瑾颖[1] 刘光斌[1] 

机构地区：[1]第二炮兵工程学院,西安710025

出　　处：《弹箭与制导学报》2007年第2期53-56,共4页Journal of Projectiles,Rockets,Missiles and Guidance

摘　　要：为了计算挠性陀螺仪扭杆细颈的刚度,采用大型通用有限元分析软件ANSYS进行分析,必须首先建立挠性接头的有限元模型。文中用ANSYS交互运行界面和APDL语言相结合的办法对挠性接头进行建模,简单地改变模型中的某些参数值就可以建立新的模型;采用拖拉法生成完整的网格模型,能够更好地控制单元形状。最后列举了一种宽度的挠性接头的静力和模态分析例子,证实了扭杆细颈受到应力最大是挠性接头的最薄弱环节。The finite element software ANSYS is applied to analyze the rigidity of the flexible joint, which is necessary to make its finite element model firstly. In this paper, a modeling method of the flexible joint is introduced through the combination of GUI and APDL. which is a very easy and fast method of modeling by changing the relevant parameter, extruding method is used to set up the whole mesh model to control the element＇s shape. A static and dynamic model analysis example of the flexible joint with one kind of width is given which confirms that the center of flexible joint is the most vulnerable tache.

关 键 词：ANSYS 挠性接头 有限元模型 

分 类 号：V241.5[航空宇航科学与技术—飞行器设计]