利用高功率激光驱动冲击波进行金材料状态方程实验测量  

Experimental Measurements on Equation of State of Gold by Using High Power Laser Driving Shocks

作　　者：黄秀光[1] 傅思祖[1] 舒桦[1] 叶君建[1] 吴江[1] 何钜华[1] 马民勋[1] 顾援[1] 罗平庆[2] 龙滔[2] 

机构地区：[1]上海激光等离子体研究所高功率激光物理国家实验室,上海201800 [2]北京应用物理与计算数学研究所,北京100088

出　　处：《中国激光》2007年第6期743-747,共5页Chinese Journal of Lasers

基　　金：国家863计划(2005AA843030);中国国防科技预研(42602060205)资助项目

摘　　要：利用“神光-Ⅱ”装置第九路输出的倍频激光,采用直接驱动方式进行了金(Au)材料状态方程(EOS)实验。首先采用透镜列阵均匀辐照技术对输出的倍频激光进行了光束匀滑,平面靶实验结果显示冲击波具有良好的平面性,间接表明靶面上驱动激光强度的空间分布比较均匀。同时采用多台阶靶技术,对驱动冲击波的传播稳定性进行了实验测量,结果表明冲击波在实验测试的靶厚度范围内都是稳定传播的,实验结果与数值模拟结果也符合得较好。在此基础上,采用阻抗匹配方法,实验测量了金材料的状态方程,在金材料中获得了高达2.7 TPa的冲击压强,冲击波速度测量相对扩展不确定度达2%(K=2),并将实验数据与已有实验数据及状态方程模型进行了比较。Equation of state （EOS） experiments were performed using a double-frequency （2ω） laser pulse, which exported from the ninth beam of ＂SG-Ⅱ ＂ laser facility. The ninth laser beam was smoothed by lens-array （LA） uniform illumination technique to generate a flat-top intensity distribution at the target plane and planar shock fronts in targets, which was validated by the plane-target experiments. The shockwave stabilities were experimentally measured by the multi-step target technique. The results showed that the shocks were steady enough during the target thickness range in which the shock velocity was measured. Also, the results were consistent with the numerical simulation results. On this base, the Au EOS was measured by using the impedance-matching technique. Shock pressure higher than 2.7 TPa was achieved in Au, and the relative expanded uncertainties of the measured shockwave velocity were 2% （K = 2）. Moreover, the experimental data were compared with existing experimental data and EOS models.

关 键 词：激光技术 状态方程 冲击波 平面性 稳定性 

分 类 号：O521.2[理学—高压高温物理]