微量组分(Cr_2Ni)对Cu_(50)Zr_(42)Al_8大块非晶玻璃形成能力的影响  

Influence of micro-composition(Cr_2Ni) on amorphous forming ability of bulk metallic glass of Cu_(50)Zr_(42)Al_8

作　　者：寇生中[1] 高忙忙[1] 岳武[1] 丁雨田[1] 许广济[1] 

机构地区：[1]兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室

出　　处：《兰州理工大学学报》2007年第3期5-7,共3页Journal of Lanzhou University of Technology

基　　金：国家自然科学基金(50371016)

摘　　要：在水冷铜坩埚中采用铜模吸铸法制备直径为4 mm的Cu50Zr42Al8和(Cu50Zr42Al8)100-x(Cr2Ni)x(x=0、1、2、3、4)合金圆棒.利用X射线衍射(XRD)和差分扫描量热(DSC)分别对合金的结构和非晶形成能力进行研究,结果表明,Cu50Zr42Al8和(Cu50Zr42Al8)98(Cr2Ni)2为完全非晶.(Cu50Zr42Al8)98(Cr2Ni)2具有较高的过冷液相区(ΔTx达65 K)和较大的热稳定性,且为近共晶成份,但其非晶形成能力比Cu50Zr42Al8略有降低.Two alloy rods of Cu50 Zr42 Al8 and （Cu50 Zr42 Al8 ） 100-x （Cr2 Ni）x（x=0,1,2,3,4） with diameters of 4. 0 mm were prepared with copper mold and suction casting method in water-cooled crucible. The structure and glass forming ability of the alloys were investigated by using X-ray diffraction （XRD） and differential thermal analysis （DTA）, respectively. It was shown that Cu50Zr42Al8 and （Cu50Zr42A18）98- （Cr2Ni）2 were both fully amorphous. Composition of the （Cu50Zr42Al8）98 （Cr2Ni）2 was nearly eutectic with larger thermal stability and a so high overcooled liquid region △Tx as 65 K. Its glass forming ability, however, was decreased a little compared with Cu50Zr42Al8.

关 键 词：大块非晶 非晶形成能力 热稳定性 

分 类 号：TG139.8[一般工业技术—材料科学与工程]