橡胶支座水平剪切弹塑性力学性能试验研究  

Experimental investigation of elasticplastic mechanical behaviour of horizontal shearing of rubber bearings

作　　者：何文福[1] 刘文光[2] 杨彦飞[2] 霍达[1] 

机构地区：[1]北京工业大学建筑工程学院,北京100022 [2]广州大学土木工程学院,广东广州510405

出　　处：《兰州理工大学学报》2007年第3期120-123,共4页Journal of Lanzhou University of Technology

基　　金：国家自然科学基金(50578045)

摘　　要：通过对铅芯橡胶支座剪切弹塑性力学性能试验,发现铅芯橡胶支座的滞回曲线与加载时程密切相关,在同一水平应变下,水平剪切刚度随加载次数的增多有所减小,最后趋于稳定;在不同应变下,水平剪切刚度随应变的增大而减小.试验还表明铅芯橡胶支座不仅在大应变存在着小应变滞回特性,而且在小应变也存在着小应变滞回特性.Based on the test of shearing elastic-plastic mechanical behaviour of leading rubber bearings, it was found that the hysteresis behaviour was closely correlated with loading history. The horizontal shear stiffness decreased with loading times when the level of strain was identical, and the stiffness became steady on the end. In the case of varying strain, the horizontal shear stiffness decreased with the strain. The test also showed that the small strain hysteresis took place not only with a large strain but also with small one.

关 键 词：铅芯橡胶支座 剪切弹塑性 小应变滞回特性 

分 类 号：TU352.12[建筑科学—结构工程]