Ni/α-Al_2O_3纳米复合电镀工艺的研究 第五部分──纳米复合镀层的形貌、成分和结构分析  

Study on the Ni/α-Al_2O_3 nanocomposite plating Part V─Analysis of the composite deposits

作　　者：刘建平 高中平 彭元芳 赵国鹏 曾振欧 

机构地区：[1]广州市二轻工业科学技术研究所,广东广州510170

出　　处：《电镀与涂饰》2007年第7期23-25,共3页Electroplating & Finishing

基　　金：广州市科技攻关项目(2002Z2-D2011);广州电沉积开放实验室资助项目

摘　　要：对Ni/α-Al2O3纳米复合镀层的成分、形貌和结构进行了分析。EPMA成分及面扫描分析表明,镀液中的纳米α-Al2O3粒子确实进入了镀层,而且分布均匀;FESEM分析表明,随电流密度的增大,镀层的结晶越粗大,越类似Watts镀层;XRD分析表明,直流电源得到的镀层结构中以Ni(111)晶面结晶为主,Ni(200)、Ni(220)晶面结晶为辅,与Watts镀层类似;而双脉冲电源得到的镀层结构以Ni(200)晶面结晶为主,Ni(111)晶面结晶为辅,与Watts镀层不同。Components, morphology and structure of the Ni/α-Al2O3 nanocomposite coatings are analyzed by EPMA, FESEM and XRD. EPMA results show that the nano-alumina particles are incorporated into the coatings and dispersed uniformly; FESEM analysis indicates that the grains of the deposits increase with cathode current density and that is similar to the Watt nickel coatings; XRD curves of the crystal plane show Ni（111） preference under direct current, which resembles Watt nickel coatings, but under pulse reverse current it shows Ni（200） preference, which is different from Watt nickel coatings.

关 键 词：纳米Α-AL2O3 复合电镀 结晶 

分 类 号：TQ153.12[化学工程—电化学工业]