Effect of Cerium on Microstructure and Electrochemical Performance of Ti-V-Cr-Ni Electrode Alloy  

作　　者：乔玉卿 赵敏寿 朱新坚 曹广义 

机构地区：[1]State Key Laboratory of Metastable Materials Science and Technology,Yanshan University [2]Key Laboratory of Rare Earth Chemistry and Physics,Changchun Institute of Applied Chemistry,Chinese Academy of Sciences,Changchun 130022,China [3]Institute of Fuel Cell,Shanghai Jiaotong University

出　　处：《Journal of Rare Earths》2007年第3期341-347,共7页稀土学报（英文版）

基　　金：Project supported by the National Natural Science Foundation of China(20171042)

摘　　要：Effect of cerium on the microstructure and electrochemical performance of the Ti0.25V0.35-xCexCr0.1Ni0.3（x=0,0.005）electrode alloy was investigated by X-ray diffraction（XRD）,field emission scanning electron microscopy/energy dispersive X-ray spectrometry（FESEM-EDS）,and electrochemical impedance spectroscopy（EIS）measurements.On the basis of XRD and FESEM-EDS analysis,the alloy was mainly composed of V-based solid solution with body-centered-cubic structure and TiNi-based secondary phase.Ce did not exist in two phases,instead,it existed as Ce-rich small white particles,with irregular edges,distributed near the grain boundaries of the V-based solid solution phase.Discharge capacity,cycle stability,and high-rate discharge ability of the alloy electrode were effectively improved with the addition of Ce at 293 K.It was very surprising that the charge retention was abnormal with larger discharge capacity after standing at the open circuit for 24 h.EIS indicated that addition of Ce improved the dynamic performance,which caused the charge transfer resistance（RT）to decrease and exchange current density（I0）to increase markedly.The exchange current density of the electrochemical reaction on the alloy surface with Ce addition was about 2.07 and 3.10 times larger than that of the alloy without Ce at 303 and 343 K,respectively.The diffusion coefficient of hydrogen（D）in the bulk alloy electrode decreased with addition of Ce,but it did not decrease so much,and the apparent activation energy（△rH）was far higher than that of the AB5 type alloy.Effect of cerium on the microstructure and electrochemical performance of the Ti0.25V0.35-xCexCr0.1Ni0.3（x=0,0.005）electrode alloy was investigated by X-ray diffraction（XRD）,field emission scanning electron microscopy/energy dispersive X-ray spectrometry（FESEM-EDS）,and electrochemical impedance spectroscopy（EIS）measurements.On the basis of XRD and FESEM-EDS analysis,the alloy was mainly composed of V-based solid solution with body-centered-cubic structure and TiNi-based secondary phase.Ce did not exist in two phases,instead,it existed as Ce-rich small white particles,with irregular edges,distributed near the grain boundaries of the V-based solid solution phase.Discharge capacity,cycle stability,and high-rate discharge ability of the alloy electrode were effectively improved with the addition of Ce at 293 K.It was very surprising that the charge retention was abnormal with larger discharge capacity after standing at the open circuit for 24 h.EIS indicated that addition of Ce improved the dynamic performance,which caused the charge transfer resistance（RT）to decrease and exchange current density（I0）to increase markedly.The exchange current density of the electrochemical reaction on the alloy surface with Ce addition was about 2.07 and 3.10 times larger than that of the alloy without Ce at 303 and 343 K,respectively.The diffusion coefficient of hydrogen（D）in the bulk alloy electrode decreased with addition of Ce,but it did not decrease so much,and the apparent activation energy（△rH）was far higher than that of the AB5 type alloy.

关 键 词：electrode alloy solid solution alloy EIS rare earths 

分 类 号：TM910.4[电气工程—电力电子与电力传动]