微小型座体零件的车铣加工技术  

Investigation of Turn-milling Machining Technology for Micro-base-parts

作　　者：刘克非[1] 刘海生[1] 李春平[2] 张之敬[3] 

机构地区：[1]襄樊学院,湖北襄樊441053 [2]军事经济学院襄樊分院,湖北襄樊441118 [3]北京理工大学,北京100081

出　　处：《机械工程师》2007年第7期16-18,共3页Mechanical Engineer

基　　金：国家部委基金项目(K130306014);北京重点学科基金项目(XK100070424);湖北省教育厅重点科研资助项目(D200725003)

摘　　要：在对微小型座体零件结构分析的基础上,制定了基于车铣加工技术、以实现完整加工为目标的详细加工工艺路线。经过实际车铣加工试验,实现了微小型硬铝座体零件的完整加工。质量检测结果表明完全达到了设计要求。通过对大量实验结果分析,归纳出加工工艺规程及基本原则,还就其它相关问题进行了讨论。Based on the analysis of structure of micro-base-parts, drew up a detailed route of the complete machining process. The duralumin micro-base-part is produced after the turn-milling cutting experiment. Tile test results show that the part＇s quality meets design requirements completely. Through analyzing great lot experimental results, basic principle to establish machining process planning based on complete machining is summed up, and other precautions are discussed.

关 键 词：微小型零件 车铣技术 完整加工 

分 类 号：TG506[金属学及工艺—金属切削加工及机床]