基于Solidworks的超磁致驱动装置设计与建模  

The Design and Modeling of the Giant Magneto Driving Device Based on Solidworks

作　　者：赵亚鹏[1] 陈定方[1] 卢全国[1] 钟毓宁[2] 

机构地区：[1]武汉理工大学智能制造与控制研究所,湖北武汉430081 [2]湖北工业大学现代制造质量工程湖北省重点实验室,湖北武汉430068

出　　处：《湖北工业大学学报》2007年第4期40-42,共3页Journal of Hubei University of Technology

基　　金：国家"863"高技术研究发展计算基金项目(2003AA414011);现代制造质量工程湖北省重点实验室开放基金项目(KNQ2006A01)

摘　　要：介绍了使用SolidWorks进行建模的特点和一般设计过程,并结合超磁致驱动装置的设计运用SolidWorks来进行零件设计、生成装配体、运动仿真及生成二维工程图.在对超磁致驱动装置进行建模的过程中,发现装配中存在的干涉和间隙等问题,进行了及时修改,确保设计更加合理.The characteristics of modeling with solidworks software, the common course to design, the characteristics and application of the Giant Magnetostrictive materials are presented. With the design of the Giant Magneto driving device, parts designing, assembling, motion simulation as well as 2D engineering drawing with solidworks are made. In the process of modeling on the Giant Magneto driving device, when the problems such as the interference and clearance in the assembly are found, the modification will be made in time, making sure that the design is more reasonable.

关 键 词：SOLIDWORKS 超磁致驱动装置 建模 

分 类 号：TH122[机械工程—机械设计及理论]