检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王高峰[1] 松林[1] 李福安[1] 哈斯朝鲁[1] 李新文[1] 特古斯[1]
机构地区:[1]内蒙古师范大学磁性材料重点实验室,呼和浩特010022
出 处:《金属学报》2007年第8期889-892,共4页Acta Metallurgica Sinica
基 金:国家自然科学基金项目50261003;内蒙古自治区高等学校科学研究项目NJ05101资助
摘 要:通过XRD和磁性测量对非化学计量比MnFe(P,Si,Ge)合金的相组成和磁性进行了研究.xRD分析表明。所有样品都具有Fe_2P型六角结构,主相为(Re,Mn)_2(P,Si,Ge),并存在少量的第二相(Fe,Mn)_3(Si,Ge).过量的Mn和Fe都会使合金的Curie温度降低,由343K(化学计量比)降低到294K(过量Mn)和286K(过量Fe);过量的Mn能减小热滞,而过量的Fe会使热滞增加;磁熵变也有所减小,在1.5T的磁场下,最大磁熵变由5.2J/(kg·K)(化学计量比)减小到4.9J/(kg·K)(过量Mn)和3.8J/(kg·K)(过量Fe).The phases and magnetic properties of non-stoichiometric MnFe(P, Si, Ge) alloys have been measured by XRD and magnetic measurements. XRD analysis indicated that all the samples consist of the matrix (Fe, Mn)2(P, Si, Ge) phase and a small amount of the second phase (Fe, Mn)3(Si, Ge). The superfluous Mn and Fe can reduce the Curie temperature from 343 K to 294 and 286 K, respectively. The superfluous Mn can decrease the thermal hysteresis, but the superfluous Fe can increase it. However, the entropy change decreased from 5.2 J/(kg·K) (stoichiometric) to 4.9 J/(kg·K) (superfluous Mn) and 3.8 J/(kg·K) (superfluous Fe).
关 键 词:MnFe(P Si Ge)合金 非化学计量比 CURIE温度 热滞 磁熵变
分 类 号:TG139.6[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15