光学头力矩器的工艺因素对其动态性能的影响  

Influence of processing factors on the dynamic characteristics of optical pickup actuators

作　　者：汝继刚[1] 马建设[1] 潘龙法[1] 

机构地区：[1]清华大学精密仪器与机械学系光盘国家工程研究中心,北京100084

出　　处：《清华大学学报（自然科学版）》2007年第8期1291-1294,共4页Journal of Tsinghua University(Science and Technology)

基　　金：信息产业部电子发展基金项目(信部运[2004]406)

摘　　要：为提高光学头力矩器在大规模生产条件下的性能一致性,研究了力矩器生产过程中7种工艺因素误差对力矩器动态性能参数的影响。以有限元仿真并结合田口实验设计方法和数学统计原理,分析得出:悬线竖直预变形量对扭转共振频率的影响贡献率为72.4%,永磁铁轴向安装误差对扭转共振峰值和偏转共振峰值的影响贡献率分别为51.9%和58.1%,永磁铁水平安装误差对物镜倾角的影响贡献率为93.6%。结果表明,悬线竖直预变形量与永磁铁水平、轴向安装误差属于关键工艺因素,生产中应重点控制。The influences of 7 production factors on the dynamic characteristics of optical pickup actuators were analyzed to improve the consistency of the dynamic characteristics of the actuators in large scale production. The study used the Taguchi design method and statistics to analyze finite element results. The contribution of pre-deformed errors on the vertical displacement of the wire springs on the rolling resonant frequency is 72.4%. The contribution of assembly errors affecting the axial direction of the permanent magnets on the roll and yaw resonant peaks are 51.9% and 58. 1%. The contribution of assembly errors affecting the horizontal direction of the permanent magnets on the tilt angle of the objective lens is 93.6%. The results show that these three factors are the key factors affecting the actuator performance and must be precisely controlled.

关 键 词：光驱 光学头 力矩器 动态性能 工艺因素 田口方法 

分 类 号：TP333.4[自动化与计算机技术—计算机系统结构]